dmesg - NVIDIA 304.51
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.5.0-17-generic (buildd@allspice) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #28-Ubuntu SMP Tue Oct 9 19:31:23 UTC 2012 (Ubuntu 3.5.0-17.28-generic 3.5.5)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x0000000000100000-0x00000000dd71dfff] usable
BIOS-e820: [mem 0x00000000dd71e000-0x00000000dd770fff] ACPI NVS
BIOS-e820: [mem 0x00000000dd771000-0x00000000dd779fff] ACPI data
BIOS-e820: [mem 0x00000000dd77a000-0x00000000ddad8fff] reserved
BIOS-e820: [mem 0x00000000ddad9000-0x00000000ddae9fff] ACPI NVS
BIOS-e820: [mem 0x00000000ddaea000-0x00000000ddafefff] reserved
BIOS-e820: [mem 0x00000000ddaff000-0x00000000ddb00fff] ACPI NVS
BIOS-e820: [mem 0x00000000ddb01000-0x00000000ddb09fff] reserved
BIOS-e820: [mem 0x00000000ddb0a000-0x00000000ddb0ffff] ACPI NVS
BIOS-e820: [mem 0x00000000ddb10000-0x00000000ddb70fff] reserved
BIOS-e820: [mem 0x00000000ddb71000-0x00000000ddd73fff] ACPI NVS
BIOS-e820: [mem 0x00000000ddd74000-0x00000000ddefffff] usable
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100001000-0x000000021effffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.00 by American Megatrends
efi: SMBIOS=0xddb6f918 ACPI=0xdd771000 ACPI 2.0=0xdd771000
efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000008000) (0MB)
efi: mem01: type=7, attr=0xf, range=[0x0000000000008000-0x000000000004f000) (0MB)
efi: mem02: type=4, attr=0xf, range=[0x000000000004f000-0x0000000000060000) (0MB)
efi: mem03: type=3, attr=0xf, range=[0x0000000000060000-0x00000000000a0000) (0MB)
efi: mem04: type=7, attr=0xf, range=[0x0000000000100000-0x0000000001000000) (15MB)
efi: mem05: type=2, attr=0xf, range=[0x0000000001000000-0x0000000001100000) (1MB)
efi: mem06: type=4, attr=0xf, range=[0x0000000001100000-0x0000000001721000) (6MB)
efi: mem07: type=3, attr=0xf, range=[0x0000000001721000-0x0000000001723000) (0MB)
efi: mem08: type=4, attr=0xf, range=[0x0000000001723000-0x0000000001733000) (0MB)
efi: mem09: type=3, attr=0xf, range=[0x0000000001733000-0x0000000001737000) (0MB)
efi: mem10: type=4, attr=0xf, range=[0x0000000001737000-0x0000000001796000) (0MB)
efi: mem11: type=3, attr=0xf, range=[0x0000000001796000-0x000000000179e000) (0MB)
efi: mem12: type=4, attr=0xf, range=[0x000000000179e000-0x000000000179f000) (0MB)
efi: mem13: type=3, attr=0xf, range=[0x000000000179f000-0x00000000017a8000) (0MB)
efi: mem14: type=4, attr=0xf, range=[0x00000000017a8000-0x00000000017b5000) (0MB)
efi: mem15: type=3, attr=0xf, range=[0x00000000017b5000-0x00000000017b6000) (0MB)
efi: mem16: type=4, attr=0xf, range=[0x00000000017b6000-0x00000000017b8000) (0MB)
efi: mem17: type=3, attr=0xf, range=[0x00000000017b8000-0x00000000017c0000) (0MB)
efi: mem18: type=4, attr=0xf, range=[0x00000000017c0000-0x00000000017c4000) (0MB)
efi: mem19: type=3, attr=0xf, range=[0x00000000017c4000-0x00000000017c6000) (0MB)
efi: mem20: type=4, attr=0xf, range=[0x00000000017c6000-0x00000000017ce000) (0MB)
efi: mem21: type=3, attr=0xf, range=[0x00000000017ce000-0x00000000017d1000) (0MB)
efi: mem22: type=4, attr=0xf, range=[0x00000000017d1000-0x00000000017d8000) (0MB)
efi: mem23: type=3, attr=0xf, range=[0x00000000017d8000-0x00000000017da000) (0MB)
efi: mem24: type=4, attr=0xf, range=[0x00000000017da000-0x00000000017e3000) (0MB)
efi: mem25: type=3, attr=0xf, range=[0x00000000017e3000-0x00000000017e4000) (0MB)
efi: mem26: type=4, attr=0xf, range=[0x00000000017e4000-0x00000000017e8000) (0MB)
efi: mem27: type=3, attr=0xf, range=[0x00000000017e8000-0x00000000017eb000) (0MB)
efi: mem28: type=4, attr=0xf, range=[0x00000000017eb000-0x0000000001c05000) (4MB)
efi: mem29: type=3, attr=0xf, range=[0x0000000001c05000-0x0000000001c06000) (0MB)
efi: mem30: type=4, attr=0xf, range=[0x0000000001c06000-0x0000000001c0a000) (0MB)
efi: mem31: type=3, attr=0xf, range=[0x0000000001c0a000-0x0000000001c0c000) (0MB)
efi: mem32: type=4, attr=0xf, range=[0x0000000001c0c000-0x0000000001c17000) (0MB)
efi: mem33: type=3, attr=0xf, range=[0x0000000001c17000-0x0000000001c1a000) (0MB)
efi: mem34: type=4, attr=0xf, range=[0x0000000001c1a000-0x0000000001c2e000) (0MB)
efi: mem35: type=3, attr=0xf, range=[0x0000000001c2e000-0x0000000001c39000) (0MB)
efi: mem36: type=4, attr=0xf, range=[0x0000000001c39000-0x0000000001c3a000) (0MB)
efi: mem37: type=3, attr=0xf, range=[0x0000000001c3a000-0x0000000001c3e000) (0MB)
efi: mem38: type=4, attr=0xf, range=[0x0000000001c3e000-0x0000000001c48000) (0MB)
efi: mem39: type=3, attr=0xf, range=[0x0000000001c48000-0x0000000001c4d000) (0MB)
efi: mem40: type=4, attr=0xf, range=[0x0000000001c4d000-0x0000000001c60000) (0MB)
efi: mem41: type=3, attr=0xf, range=[0x0000000001c60000-0x0000000001c66000) (0MB)
efi: mem42: type=4, attr=0xf, range=[0x0000000001c66000-0x0000000001c69000) (0MB)
efi: mem43: type=3, attr=0xf, range=[0x0000000001c69000-0x0000000001c6a000) (0MB)
efi: mem44: type=4, attr=0xf, range=[0x0000000001c6a000-0x0000000001ca6000) (0MB)
efi: mem45: type=3, attr=0xf, range=[0x0000000001ca6000-0x0000000001caa000) (0MB)
efi: mem46: type=4, attr=0xf, range=[0x0000000001caa000-0x0000000001cac000) (0MB)
efi: mem47: type=3, attr=0xf, range=[0x0000000001cac000-0x0000000001cae000) (0MB)
efi: mem48: type=4, attr=0xf, range=[0x0000000001cae000-0x0000000001caf000) (0MB)
efi: mem49: type=3, attr=0xf, range=[0x0000000001caf000-0x0000000001ccc000) (0MB)
efi: mem50: type=4, attr=0xf, range=[0x0000000001ccc000-0x0000000001cdb000) (0MB)
efi: mem51: type=3, attr=0xf, range=[0x0000000001cdb000-0x0000000001cf2000) (0MB)
efi: mem52: type=4, attr=0xf, range=[0x0000000001cf2000-0x0000000001cfb000) (0MB)
efi: mem53: type=3, attr=0xf, range=[0x0000000001cfb000-0x0000000001d06000) (0MB)
efi: mem54: type=4, attr=0xf, range=[0x0000000001d06000-0x0000000001d09000) (0MB)
efi: mem55: type=3, attr=0xf, range=[0x0000000001d09000-0x0000000001d10000) (0MB)
efi: mem56: type=4, attr=0xf, range=[0x0000000001d10000-0x0000000001d12000) (0MB)
efi: mem57: type=3, attr=0xf, range=[0x0000000001d12000-0x0000000001d14000) (0MB)
efi: mem58: type=4, attr=0xf, range=[0x0000000001d14000-0x0000000001d16000) (0MB)
efi: mem59: type=3, attr=0xf, range=[0x0000000001d16000-0x0000000001d18000) (0MB)
efi: mem60: type=4, attr=0xf, range=[0x0000000001d18000-0x0000000001d1a000) (0MB)
efi: mem61: type=3, attr=0xf, range=[0x0000000001d1a000-0x0000000001d1c000) (0MB)
efi: mem62: type=4, attr=0xf, range=[0x0000000001d1c000-0x0000000001d1d000) (0MB)
efi: mem63: type=3, attr=0xf, range=[0x0000000001d1d000-0x0000000001d1f000) (0MB)
efi: mem64: type=4, attr=0xf, range=[0x0000000001d1f000-0x0000000001d29000) (0MB)
efi: mem65: type=3, attr=0xf, range=[0x0000000001d29000-0x0000000001d2e000) (0MB)
efi: mem66: type=4, attr=0xf, range=[0x0000000001d2e000-0x0000000001d30000) (0MB)
efi: mem67: type=3, attr=0xf, range=[0x0000000001d30000-0x0000000001d32000) (0MB)
efi: mem68: type=4, attr=0xf, range=[0x0000000001d32000-0x0000000001d61000) (0MB)
efi: mem69: type=3, attr=0xf, range=[0x0000000001d61000-0x0000000001d64000) (0MB)
efi: mem70: type=4, attr=0xf, range=[0x0000000001d64000-0x0000000001d69000) (0MB)
efi: mem71: type=3, attr=0xf, range=[0x0000000001d69000-0x0000000001d71000) (0MB)
efi: mem72: type=4, attr=0xf, range=[0x0000000001d71000-0x0000000001d7d000) (0MB)
efi: mem73: type=3, attr=0xf, range=[0x0000000001d7d000-0x0000000001d90000) (0MB)
efi: mem74: type=4, attr=0xf, range=[0x0000000001d90000-0x0000000001dc9000) (0MB)
efi: mem75: type=3, attr=0xf, range=[0x0000000001dc9000-0x0000000001dd7000) (0MB)
efi: mem76: type=4, attr=0xf, range=[0x0000000001dd7000-0x0000000001dd8000) (0MB)
efi: mem77: type=3, attr=0xf, range=[0x0000000001dd8000-0x0000000001ddb000) (0MB)
efi: mem78: type=4, attr=0xf, range=[0x0000000001ddb000-0x0000000001dde000) (0MB)
efi: mem79: type=3, attr=0xf, range=[0x0000000001dde000-0x0000000001ddf000) (0MB)
efi: mem80: type=4, attr=0xf, range=[0x0000000001ddf000-0x0000000001de0000) (0MB)
efi: mem81: type=3, attr=0xf, range=[0x0000000001de0000-0x0000000001e10000) (0MB)
efi: mem82: type=4, attr=0xf, range=[0x0000000001e10000-0x0000000001e26000) (0MB)
efi: mem83: type=3, attr=0xf, range=[0x0000000001e26000-0x0000000001e2c000) (0MB)
efi: mem84: type=4, attr=0xf, range=[0x0000000001e2c000-0x0000000001e2d000) (0MB)
efi: mem85: type=3, attr=0xf, range=[0x0000000001e2d000-0x0000000001e2e000) (0MB)
efi: mem86: type=4, attr=0xf, range=[0x0000000001e2e000-0x0000000001e32000) (0MB)
efi: mem87: type=3, attr=0xf, range=[0x0000000001e32000-0x0000000001e34000) (0MB)
efi: mem88: type=4, attr=0xf, range=[0x0000000001e34000-0x0000000001e37000) (0MB)
efi: mem89: type=3, attr=0xf, range=[0x0000000001e37000-0x0000000001e3a000) (0MB)
efi: mem90: type=4, attr=0xf, range=[0x0000000001e3a000-0x0000000001e42000) (0MB)
efi: mem91: type=3, attr=0xf, range=[0x0000000001e42000-0x0000000001e55000) (0MB)
efi: mem92: type=4, attr=0xf, range=[0x0000000001e55000-0x0000000001ef9000) (0MB)
efi: mem93: type=3, attr=0xf, range=[0x0000000001ef9000-0x0000000001f02000) (0MB)
efi: mem94: type=4, attr=0xf, range=[0x0000000001f02000-0x0000000001f07000) (0MB)
efi: mem95: type=3, attr=0xf, range=[0x0000000001f07000-0x0000000001f0c000) (0MB)
efi: mem96: type=4, attr=0xf, range=[0x0000000001f0c000-0x0000000001f16000) (0MB)
efi: mem97: type=3, attr=0xf, range=[0x0000000001f16000-0x0000000001f1b000) (0MB)
efi: mem98: type=4, attr=0xf, range=[0x0000000001f1b000-0x0000000001f23000) (0MB)
efi: mem99: type=3, attr=0xf, range=[0x0000000001f23000-0x0000000001f27000) (0MB)
efi: mem100: type=4, attr=0xf, range=[0x0000000001f27000-0x0000000001f2b000) (0MB)
efi: mem101: type=3, attr=0xf, range=[0x0000000001f2b000-0x0000000001f2d000) (0MB)
efi: mem102: type=4, attr=0xf, range=[0x0000000001f2d000-0x0000000001f44000) (0MB)
efi: mem103: type=3, attr=0xf, range=[0x0000000001f44000-0x0000000001f46000) (0MB)
efi: mem104: type=4, attr=0xf, range=[0x0000000001f46000-0x0000000001f4f000) (0MB)
efi: mem105: type=3, attr=0xf, range=[0x0000000001f4f000-0x0000000001f51000) (0MB)
efi: mem106: type=4, attr=0xf, range=[0x0000000001f51000-0x0000000001f54000) (0MB)
efi: mem107: type=3, attr=0xf, range=[0x0000000001f54000-0x0000000001f6b000) (0MB)
efi: mem108: type=4, attr=0xf, range=[0x0000000001f6b000-0x0000000001f6d000) (0MB)
efi: mem109: type=3, attr=0xf, range=[0x0000000001f6d000-0x0000000001f6f000) (0MB)
efi: mem110: type=4, attr=0xf, range=[0x0000000001f6f000-0x0000000001f80000) (0MB)
efi: mem111: type=3, attr=0xf, range=[0x0000000001f80000-0x0000000001f85000) (0MB)
efi: mem112: type=4, attr=0xf, range=[0x0000000001f85000-0x0000000001f87000) (0MB)
efi: mem113: type=3, attr=0xf, range=[0x0000000001f87000-0x0000000001f96000) (0MB)
efi: mem114: type=4, attr=0xf, range=[0x0000000001f96000-0x0000000001f9b000) (0MB)
efi: mem115: type=3, attr=0xf, range=[0x0000000001f9b000-0x0000000001f9d000) (0MB)
efi: mem116: type=4, attr=0xf, range=[0x0000000001f9d000-0x0000000001fa2000) (0MB)
efi: mem117: type=3, attr=0xf, range=[0x0000000001fa2000-0x0000000001fa4000) (0MB)
efi: mem118: type=4, attr=0xf, range=[0x0000000001fa4000-0x0000000001fbe000) (0MB)
efi: mem119: type=3, attr=0xf, range=[0x0000000001fbe000-0x0000000001fc2000) (0MB)
efi: mem120: type=4, attr=0xf, range=[0x0000000001fc2000-0x0000000001fc7000) (0MB)
efi: mem121: type=3, attr=0xf, range=[0x0000000001fc7000-0x0000000001fd8000) (0MB)
efi: mem122: type=4, attr=0xf, range=[0x0000000001fd8000-0x0000000001fef000) (0MB)
efi: mem123: type=7, attr=0xf, range=[0x0000000001fef000-0x0000000001ff0000) (0MB)
efi: mem124: type=4, attr=0xf, range=[0x0000000001ff0000-0x0000000002016000) (0MB)
efi: mem125: type=7, attr=0xf, range=[0x0000000002016000-0x0000000002019000) (0MB)
efi: mem126: type=4, attr=0xf, range=[0x0000000002019000-0x000000000201a000) (0MB)
efi: mem127: type=3, attr=0xf, range=[0x000000000201a000-0x0000000002431000) (4MB)
efi: mem128: type=4, attr=0xf, range=[0x0000000002431000-0x000000000288a000) (4MB)
efi: mem129: type=3, attr=0xf, range=[0x000000000288a000-0x000000000288b000) (0MB)
efi: mem130: type=4, attr=0xf, range=[0x000000000288b000-0x000000000289c000) (0MB)
efi: mem131: type=3, attr=0xf, range=[0x000000000289c000-0x000000000289e000) (0MB)
efi: mem132: type=4, attr=0xf, range=[0x000000000289e000-0x0000000002978000) (0MB)
efi: mem133: type=7, attr=0xf, range=[0x0000000002978000-0x0000000002979000) (0MB)
efi: mem134: type=3, attr=0xf, range=[0x0000000002979000-0x00000000029a1000) (0MB)
efi: mem135: type=4, attr=0xf, range=[0x00000000029a1000-0x00000000029a9000) (0MB)
efi: mem136: type=7, attr=0xf, range=[0x00000000029a9000-0x00000000029c0000) (0MB)
efi: mem137: type=1, attr=0xf, range=[0x00000000029c0000-0x00000000029de000) (0MB)
efi: mem138: type=7, attr=0xf, range=[0x00000000029de000-0x0000000002a20000) (0MB)
efi: mem139: type=4, attr=0xf, range=[0x0000000002a20000-0x0000000002cf3000) (2MB)
efi: mem140: type=2, attr=0xf, range=[0x0000000002cf3000-0x0000000004042000) (19MB)
efi: mem141: type=7, attr=0xf, range=[0x0000000004042000-0x0000000005000000) (15MB)
efi: mem142: type=2, attr=0xf, range=[0x0000000005000000-0x000000000634f000) (19MB)
efi: mem143: type=7, attr=0xf, range=[0x000000000634f000-0x00000000362e8000) (767MB)
efi: mem144: type=2, attr=0xf, range=[0x00000000362e8000-0x000000003716c000) (14MB)
efi: mem145: type=7, attr=0xf, range=[0x000000003716c000-0x00000000a68be000) (1783MB)
efi: mem146: type=2, attr=0xf, range=[0x00000000a68be000-0x00000000dd71e000) (878MB)
efi: mem147: type=10, attr=0xf, range=[0x00000000dd71e000-0x00000000dd771000) (0MB)
efi: mem148: type=9, attr=0xf, range=[0x00000000dd771000-0x00000000dd77a000) (0MB)
efi: mem149: type=0, attr=0xf, range=[0x00000000dd77a000-0x00000000ddab3000) (3MB)
efi: mem150: type=6, attr=0x800000000000000f, range=[0x00000000ddab3000-0x00000000ddab7000) (0MB)
efi: mem151: type=0, attr=0xf, range=[0x00000000ddab7000-0x00000000ddad9000) (0MB)
efi: mem152: type=10, attr=0xf, range=[0x00000000ddad9000-0x00000000ddaea000) (0MB)
efi: mem153: type=5, attr=0x800000000000000f, range=[0x00000000ddaea000-0x00000000ddaec000) (0MB)
efi: mem154: type=6, attr=0x800000000000000f, range=[0x00000000ddaec000-0x00000000ddafd000) (0MB)
efi: mem155: type=5, attr=0x800000000000000f, range=[0x00000000ddafd000-0x00000000ddafe000) (0MB)
efi: mem156: type=6, attr=0x800000000000000f, range=[0x00000000ddafe000-0x00000000ddaff000) (0MB)
efi: mem157: type=10, attr=0xf, range=[0x00000000ddaff000-0x00000000ddb01000) (0MB)
efi: mem158: type=5, attr=0x800000000000000f, range=[0x00000000ddb01000-0x00000000ddb02000) (0MB)
efi: mem159: type=6, attr=0x800000000000000f, range=[0x00000000ddb02000-0x00000000ddb03000) (0MB)
efi: mem160: type=5, attr=0x800000000000000f, range=[0x00000000ddb03000-0x00000000ddb0a000) (0MB)
efi: mem161: type=10, attr=0xf, range=[0x00000000ddb0a000-0x00000000ddb10000) (0MB)
efi: mem162: type=5, attr=0x800000000000000f, range=[0x00000000ddb10000-0x00000000ddb1c000) (0MB)
efi: mem163: type=6, attr=0x800000000000000f, range=[0x00000000ddb1c000-0x00000000ddb5e000) (0MB)
efi: mem164: type=5, attr=0x800000000000000f, range=[0x00000000ddb5e000-0x00000000ddb6e000) (0MB)
efi: mem165: type=6, attr=0x800000000000000f, range=[0x00000000ddb6e000-0x00000000ddb71000) (0MB)
efi: mem166: type=10, attr=0xf, range=[0x00000000ddb71000-0x00000000ddd74000) (2MB)
efi: mem167: type=3, attr=0xf, range=[0x00000000ddd74000-0x00000000ddeeb000) (1MB)
efi: mem168: type=4, attr=0xf, range=[0x00000000ddeeb000-0x00000000ddef2000) (0MB)
efi: mem169: type=3, attr=0xf, range=[0x00000000ddef2000-0x00000000ddf00000) (0MB)
efi: mem170: type=7, attr=0xf, range=[0x0000000100001000-0x000000021f000000) (4591MB)
efi: mem171: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
efi: mem172: type=11, attr=0x8000000000000001, range=[0x00000000fec10000-0x00000000fec11000) (0MB)
efi: mem173: type=11, attr=0x8000000000000001, range=[0x00000000fec20000-0x00000000fec21000) (0MB)
efi: mem174: type=11, attr=0x8000000000000001, range=[0x00000000fed00000-0x00000000fed01000) (0MB)
efi: mem175: type=11, attr=0x8000000000000001, range=[0x00000000fed61000-0x00000000fed71000) (0MB)
efi: mem176: type=11, attr=0x8000000000000001, range=[0x00000000fed80000-0x00000000fed90000) (0MB)
efi: mem177: type=11, attr=0x8000000000000001, range=[0x00000000fef00000-0x0000000100000000) (17MB)
DMI 2.7 present.
DMI: To be filled by O.E.M. To be filled by O.E.M./Crosshair V Formula, BIOS 1503 06/27/2012
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x21f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-through
C0000-D6FFF write-protect
D7000-EBFFF uncachable
EC000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000C0000000 mask FFFFE0000000 write-back
3 base 0000DDF00000 mask FFFFFFF00000 uncachable
4 base 0000DE000000 mask FFFFFE000000 uncachable
5 disabled
6 disabled
7 disabled
TOM2: 000000021f000000 aka 8688M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 512MB, type WB
reg 3, base: 3551MB, range: 1MB, type UC
reg 4, base: 3552MB, range: 32MB, type UC
total RAM covered: 3551M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 1G num_reg: 4 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 4GB, type WB
reg 1, base: 3551MB, range: 1MB, type UC
reg 2, base: 3552MB, range: 32MB, type UC
reg 3, base: 3584MB, range: 512MB, type UC
e820: update [mem 0xddf00000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xddf00 max_arch_pfn = 0x400000000
initial memory mapped: [mem 0x00000000-0x1fffffff]
Base memory trampoline at [ffff880000097000] 97000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0xddefffff]
[mem 0x00000000-0xbfffffff] page 1G
[mem 0xc0000000-0xdddfffff] page 2M
[mem 0xdde00000-0xddefffff] page 4k
kernel direct mapping tables up to 0xddefffff @ [mem 0x1fffd000-0x1fffffff]
init_memory_mapping: [mem 0x100000000-0x21effffff]
[mem 0x100000000-0x1ffffffff] page 1G
[mem 0x200000000-0x21effffff] page 2M
kernel direct mapping tables up to 0x21effffff @ [mem 0xdd71c000-0xdd71dfff]
RAMDISK: [mem 0x362e8000-0x3716bfff]
ACPI: RSDP 00000000dd771000 00024 (v02 ALASKA)
ACPI: XSDT 00000000dd771068 0004C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 00000000dd778330 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20120320/tbfadt-579)
ACPI: DSDT 00000000dd771140 071EC (v02 ALASKA A M I 00000000 INTL 20051117)
ACPI: FACS 00000000ddb0af80 00040
ACPI: APIC 00000000dd778428 0009E (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 00000000dd7784c8 0003C (v01 ALASKA A M I 01072009 MSFT 00010013)
ACPI: HPET 00000000dd778508 00038 (v01 ALASKA A M I 01072009 AMI 00000004)
ACPI: SSDT 00000000dd778540 01714 (v01 AMD POWERNOW 00000001 AMD 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000021effffff]
Initmem setup node 0 [mem 0x00000000-0x21effffff]
NODE_DATA [mem 0x21effc000-0x21effffff]
[ffffea0000000000-ffffea00087fffff] PMD -> [ffff880216600000-ffff88021e5fffff] on node 0
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x21effffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0009ffff]
node 0: [mem 0x00100000-0xdd71dfff]
node 0: [mem 0xddd74000-0xddefffff]
node 0: [mem 0x100001000-0x21effffff]
On node 0 totalpages: 2082873
DMA zone: 64 pages used for memmap
DMA zone: 29 pages reserved
DMA zone: 3891 pages, LIFO batch:0
DMA32 zone: 16320 pages used for memmap
DMA32 zone: 887018 pages, LIFO batch:31
Normal zone: 18368 pages used for memmap
Normal zone: 1157183 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x15] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x17] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x09] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x0a] address[0xfec20000] gsi_base[24])
IOAPIC[1]: apic_id 10, version 33, address 0xfec20000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0xffffffff base: 0xfed00000
SMP: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 72
PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
PM: Registered nosave memory: 00000000dd71e000 - 00000000dd771000
PM: Registered nosave memory: 00000000dd771000 - 00000000dd77a000
PM: Registered nosave memory: 00000000dd77a000 - 00000000ddad9000
PM: Registered nosave memory: 00000000ddad9000 - 00000000ddaea000
PM: Registered nosave memory: 00000000ddaea000 - 00000000ddaff000
PM: Registered nosave memory: 00000000ddaff000 - 00000000ddb01000
PM: Registered nosave memory: 00000000ddb01000 - 00000000ddb0a000
PM: Registered nosave memory: 00000000ddb0a000 - 00000000ddb10000
PM: Registered nosave memory: 00000000ddb10000 - 00000000ddb71000
PM: Registered nosave memory: 00000000ddb71000 - 00000000ddd74000
PM: Registered nosave memory: 00000000ddf00000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
PM: Registered nosave memory: 00000000fec01000 - 00000000fec10000
PM: Registered nosave memory: 00000000fec10000 - 00000000fec11000
PM: Registered nosave memory: 00000000fec11000 - 00000000fec20000
PM: Registered nosave memory: 00000000fec20000 - 00000000fec21000
PM: Registered nosave memory: 00000000fec21000 - 00000000fed00000
PM: Registered nosave memory: 00000000fed00000 - 00000000fed01000
PM: Registered nosave memory: 00000000fed01000 - 00000000fed61000
PM: Registered nosave memory: 00000000fed61000 - 00000000fed71000
PM: Registered nosave memory: 00000000fed71000 - 00000000fed80000
PM: Registered nosave memory: 00000000fed80000 - 00000000fed90000
PM: Registered nosave memory: 00000000fed90000 - 00000000fef00000
PM: Registered nosave memory: 00000000fef00000 - 0000000100000000
PM: Registered nosave memory: 0000000100000000 - 0000000100001000
e820: [mem 0xddf00000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88021ec00000 s83584 r8192 d22912 u262144
pcpu-alloc: s83584 r8192 d22912 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2048092
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Node 0: aperture @ d4000000 size 32 MB
Aperture pointing to e820 RAM. Ignoring.
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ d4000000
PM: Registered nosave memory: 00000000d4000000 - 00000000d8000000
Memory: 8007420k/8896512k available (6711k kernel code, 565020k absent, 324072k reserved, 6459k data, 928k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:16640 nr_irqs:1288 16
Extended CMOS year: 2000
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
allocated 33554432 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 3612.069 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 7224.13 BogoMIPS (lpj=14448276)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
tseg: 00ddf00000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 7 MCE banks
LVT offset 1 assigned for vector 0xf9
ACPI: Core revision 20120320
ftrace: allocating 25118 entries in 99 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD FX(tm)-8150 Eight-Core Processor stepping 02
Performance Events: AMD Family 15h PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 Ok.
Brought up 8 CPUs
Total of 8 processors activated (57793.10 BogoMIPS).
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xdd71e000-0xdd770fff] (339968 bytes)
PM: Registering ACPI NVS region [mem 0xddad9000-0xddae9fff] (69632 bytes)
PM: Registering ACPI NVS region [mem 0xddaff000-0xddb00fff] (8192 bytes)
PM: Registering ACPI NVS region [mem 0xddb0a000-0xddb0ffff] (24576 bytes)
PM: Registering ACPI NVS region [mem 0xddb71000-0xddd73fff] (2109440 bytes)
dummy:
RTC time: 18:19:05, date: 10/15/12
NET: Registered protocol family 16
Trying to unpack rootfs image as initramfs...
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 2 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
ACPI: EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: >host bridge window [io 0x0000-0x03af]
pci_root PNP0A03:00: >host bridge window [io 0x03e0-0x0cf7]
pci_root PNP0A03:00: >host bridge window [io 0x03b0-0x03df]
pci_root PNP0A03:00: >host bridge window [io 0x0d00-0xffff]
pci_root PNP0A03:00: >host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A03:00: >host bridge window [mem 0x000c0000-0x000dffff]
pci_root PNP0A03:00: >host bridge window [mem 0xe0000000-0xffffffff]
PCI host bridge to bus 0000:00
pci_bus 0000:00: >root bus resource [io 0x0000-0x03af]
pci_bus 0000:00: >root bus resource [io 0x03e0-0x0cf7]
pci_bus 0000:00: >root bus resource [io 0x03b0-0x03df]
pci_bus 0000:00: >root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: >root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: >root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: >root bus resource [mem 0xe0000000-0xffffffff]
pci 0000:00:00.0: >[1002:5a14] type 00 class 0x060000
pci 0000:00:02.0: >[1002:5a16] type 01 class 0x060400
pci 0000:00:02.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: >[1002:5a18] type 01 class 0x060400
pci 0000:00:04.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: >[1002:5a19] type 01 class 0x060400
pci 0000:00:05.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: >[1002:5a1a] type 01 class 0x060400
pci 0000:00:06.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: >[1002:5a1b] type 01 class 0x060400
pci 0000:00:07.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:09.0: >[1002:5a1c] type 01 class 0x060400
pci 0000:00:09.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:11.0: >[1002:4391] type 00 class 0x010601
pci 0000:00:11.0: >reg 10: [io 0xf040-0xf047]
pci 0000:00:11.0: >reg 14: [io 0xf030-0xf033]
pci 0000:00:11.0: >reg 18: [io 0xf020-0xf027]
pci 0000:00:11.0: >reg 1c: [io 0xf010-0xf013]
pci 0000:00:11.0: >reg 20: [io 0xf000-0xf00f]
pci 0000:00:11.0: >reg 24: [mem 0xfe60b000-0xfe60b3ff]
pci 0000:00:12.0: >[1002:4397] type 00 class 0x0c0310
pci 0000:00:12.0: >reg 10: [mem 0xfe60a000-0xfe60afff]
pci 0000:00:12.2: >[1002:4396] type 00 class 0x0c0320
pci 0000:00:12.2: >reg 10: [mem 0xfe609000-0xfe6090ff]
pci 0000:00:12.2: >supports D1 D2
pci 0000:00:12.2: >PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.0: >[1002:4397] type 00 class 0x0c0310
pci 0000:00:13.0: >reg 10: [mem 0xfe608000-0xfe608fff]
pci 0000:00:13.2: >[1002:4396] type 00 class 0x0c0320
pci 0000:00:13.2: >reg 10: [mem 0xfe607000-0xfe6070ff]
pci 0000:00:13.2: >supports D1 D2
pci 0000:00:13.2: >PME# supported from D0 D1 D2 D3hot
pci 0000:00:14.0: >[1002:4385] type 00 class 0x0c0500
pci 0000:00:14.2: >[1002:4383] type 00 class 0x040300
pci 0000:00:14.2: >reg 10: [mem 0xfe600000-0xfe603fff 64bit]
pci 0000:00:14.2: >PME# supported from D0 D3hot D3cold
pci 0000:00:14.3: >[1002:439d] type 00 class 0x060100
pci 0000:00:14.4: >[1002:4384] type 01 class 0x060401
pci 0000:00:14.5: >[1002:4399] type 00 class 0x0c0310
pci 0000:00:14.5: >reg 10: [mem 0xfe606000-0xfe606fff]
pci 0000:00:16.0: >[1002:4397] type 00 class 0x0c0310
pci 0000:00:16.0: >reg 10: [mem 0xfe605000-0xfe605fff]
pci 0000:00:16.2: >[1002:4396] type 00 class 0x0c0320
pci 0000:00:16.2: >reg 10: [mem 0xfe604000-0xfe6040ff]
pci 0000:00:16.2: >supports D1 D2
pci 0000:00:16.2: >PME# supported from D0 D1 D2 D3hot
pci 0000:00:18.0: >[1022:1600] type 00 class 0x060000
pci 0000:00:18.1: >[1022:1601] type 00 class 0x060000
pci 0000:00:18.2: >[1022:1602] type 00 class 0x060000
pci 0000:00:18.3: >[1022:1603] type 00 class 0x060000
pci 0000:00:18.4: >[1022:1604] type 00 class 0x060000
pci 0000:00:18.5: >[1022:1605] type 00 class 0x060000
pci 0000:01:00.0: >[10de:1180] type 00 class 0x030000
pci 0000:01:00.0: >reg 10: [mem 0xfd000000-0xfdffffff]
pci 0000:01:00.0: >reg 14: [mem 0xf0000000-0xf7ffffff 64bit pref]
pci 0000:01:00.0: >reg 1c: [mem 0xf8000000-0xf9ffffff 64bit pref]
pci 0000:01:00.0: >reg 24: [io 0xe000-0xe07f]
pci 0000:01:00.0: >reg 30: [mem 0xfe000000-0xfe07ffff pref]
pci 0000:01:00.1: >[10de:0e0a] type 00 class 0x040300
pci 0000:01:00.1: >reg 10: [mem 0xfe080000-0xfe083fff]
pci 0000:00:02.0: >PCI bridge to [bus 01-01]
pci 0000:00:02.0: > bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: > bridge window [mem 0xfd000000-0xfe0fffff]
pci 0000:00:02.0: > bridge window [mem 0xf0000000-0xf9ffffff 64bit pref]
pci 0000:02:00.0: >[1b21:0612] type 00 class 0x010601
pci 0000:02:00.0: >reg 10: [io 0xd050-0xd057]
pci 0000:02:00.0: >reg 14: [io 0xd040-0xd043]
pci 0000:02:00.0: >reg 18: [io 0xd030-0xd037]
pci 0000:02:00.0: >reg 1c: [io 0xd020-0xd023]
pci 0000:02:00.0: >reg 20: [io 0xd000-0xd01f]
pci 0000:02:00.0: >reg 24: [mem 0xfe500000-0xfe5001ff]
pci 0000:00:04.0: >PCI bridge to [bus 02-02]
pci 0000:00:04.0: > bridge window [io 0xd000-0xdfff]
pci 0000:00:04.0: > bridge window [mem 0xfe500000-0xfe5fffff]
pci 0000:03:00.0: >[8086:150c] type 00 class 0x020000
pci 0000:03:00.0: >reg 10: [mem 0xfe400000-0xfe41ffff]
pci 0000:03:00.0: >reg 18: [io 0xc000-0xc01f]
pci 0000:03:00.0: >reg 1c: [mem 0xfe420000-0xfe423fff]
pci 0000:03:00.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: >PCI bridge to [bus 03-03]
pci 0000:00:05.0: > bridge window [io 0xc000-0xcfff]
pci 0000:00:05.0: > bridge window [mem 0xfe400000-0xfe4fffff]
pci 0000:04:00.0: >[1b21:1042] type 00 class 0x0c0330
pci 0000:04:00.0: >reg 10: [mem 0xfe300000-0xfe307fff 64bit]
pci 0000:04:00.0: >PME# supported from D3hot D3cold
pci 0000:00:06.0: >PCI bridge to [bus 04-04]
pci 0000:00:06.0: > bridge window [mem 0xfe300000-0xfe3fffff]
pci 0000:05:00.0: >[1b21:1042] type 00 class 0x0c0330
pci 0000:05:00.0: >reg 10: [mem 0xfe200000-0xfe207fff 64bit]
pci 0000:05:00.0: >PME# supported from D3hot D3cold
pci 0000:00:07.0: >PCI bridge to [bus 05-05]
pci 0000:00:07.0: > bridge window [mem 0xfe200000-0xfe2fffff]
pci 0000:06:00.0: >[1b21:1042] type 00 class 0x0c0330
pci 0000:06:00.0: >reg 10: [mem 0xfe100000-0xfe107fff 64bit]
pci 0000:06:00.0: >PME# supported from D3hot D3cold
pci 0000:00:09.0: >PCI bridge to [bus 06-06]
pci 0000:00:09.0: > bridge window [mem 0xfe100000-0xfe1fffff]
pci 0000:00:14.4: >PCI bridge to [bus 07-07] (subtractive decode)
pci 0000:00:14.4: > bridge window [io 0x0000-0x03af] (subtractive decode)
pci 0000:00:14.4: > bridge window [io 0x03e0-0x0cf7] (subtractive decode)
pci 0000:00:14.4: > bridge window [io 0x03b0-0x03df] (subtractive decode)
pci 0000:00:14.4: > bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4: > bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4: > bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:14.4: > bridge window [mem 0xe0000000-0xffffffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC04._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC05._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC06._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC07._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC09._PRT]
pci0000:00: >Requesting ACPI _OSC control (0x1d)
pci0000:00: >ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0xdd71e000-0xdfffffff]
e820: reserve RAM buffer [mem 0xddf00000-0xdfffffff]
e820: reserve RAM buffer [mem 0x21f000000-0x21fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: >[bus 00-ff]
pnp 00:00: >[io 0x0cf8-0x0cff]
pnp 00:00: >[io 0x0000-0x03af window]
pnp 00:00: >[io 0x03e0-0x0cf7 window]
pnp 00:00: >[io 0x03b0-0x03df window]
pnp 00:00: >[io 0x0d00-0xffff window]
pnp 00:00: >[mem 0x000a0000-0x000bffff window]
pnp 00:00: >[mem 0x000c0000-0x000dffff window]
pnp 00:00: >[mem 0xe0000000-0xffffffff window]
pnp 00:00: >[mem 0x00000000 window]
pnp 00:00: >Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: >[mem 0xe0000000-0xefffffff]
system 00:01: >[mem 0xe0000000-0xefffffff] has been reserved
system 00:01: >Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:02: >[io 0x040b]
pnp 00:02: >[io 0x04d6]
pnp 00:02: >[io 0x0c00-0x0c01]
pnp 00:02: >[io 0x0c14]
pnp 00:02: >[io 0x0c50-0x0c51]
pnp 00:02: >[io 0x0c52]
pnp 00:02: >[io 0x0c6c]
pnp 00:02: >[io 0x0c6f]
pnp 00:02: >[io 0x0cd0-0x0cd1]
pnp 00:02: >[io 0x0cd2-0x0cd3]
pnp 00:02: >[io 0x0cd4-0x0cd5]
pnp 00:02: >[io 0x0cd6-0x0cd7]
pnp 00:02: >[io 0x0cd8-0x0cdf]
pnp 00:02: >[io 0x0800-0x089f]
pnp 00:02: >[io 0x0000-0xffffffffffffffff disabled]
pnp 00:02: >[io 0x0000-0x000f]
pnp 00:02: >[io 0x0b20-0x0b3f]
pnp 00:02: >[io 0x0900-0x090f]
pnp 00:02: >[io 0x0910-0x091f]
pnp 00:02: >[io 0xfe00-0xfefe]
pnp 00:02: >[io 0x0060-0x005f disabled]
pnp 00:02: >[io 0x0064-0x0063 disabled]
pnp 00:02: >[mem 0xfec00000-0xfec00fff]
pnp 00:02: >[mem 0xfee00000-0xfee00fff]
pnp 00:02: >[mem 0xfed80000-0xfed8ffff]
pnp 00:02: >[mem 0xfed61000-0xfed70fff]
pnp 00:02: >[mem 0xfec10000-0xfec10fff]
pnp 00:02: >[mem 0xfed00000-0xfed00fff]
pnp 00:02: >[mem 0xffc00000-0xffffffff]
system 00:02: >[io 0x040b] has been reserved
system 00:02: >[io 0x04d6] has been reserved
system 00:02: >[io 0x0c00-0x0c01] has been reserved
system 00:02: >[io 0x0c14] has been reserved
system 00:02: >[io 0x0c50-0x0c51] has been reserved
system 00:02: >[io 0x0c52] has been reserved
system 00:02: >[io 0x0c6c] has been reserved
system 00:02: >[io 0x0c6f] has been reserved
system 00:02: >[io 0x0cd0-0x0cd1] has been reserved
system 00:02: >[io 0x0cd2-0x0cd3] has been reserved
system 00:02: >[io 0x0cd4-0x0cd5] has been reserved
system 00:02: >[io 0x0cd6-0x0cd7] has been reserved
system 00:02: >[io 0x0cd8-0x0cdf] has been reserved
system 00:02: >[io 0x0800-0x089f] has been reserved
system 00:02: >[io 0x0b20-0x0b3f] has been reserved
system 00:02: >[io 0x0900-0x090f] has been reserved
system 00:02: >[io 0x0910-0x091f] has been reserved
system 00:02: >[io 0xfe00-0xfefe] has been reserved
system 00:02: >[mem 0xfec00000-0xfec00fff] could not be reserved
system 00:02: >[mem 0xfee00000-0xfee00fff] has been reserved
system 00:02: >[mem 0xfed80000-0xfed8ffff] has been reserved
system 00:02: >[mem 0xfed61000-0xfed70fff] has been reserved
system 00:02: >[mem 0xfec10000-0xfec10fff] has been reserved
system 00:02: >[mem 0xfed00000-0xfed00fff] has been reserved
system 00:02: >[mem 0xffc00000-0xffffffff] has been reserved
system 00:02: >Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: >[io 0x0000-0xffffffffffffffff disabled]
pnp 00:03: >[io 0x0290-0x02af]
pnp 00:03: >[io 0x0000-0xffffffffffffffff disabled]
system 00:03: >[io 0x0290-0x02af] has been reserved
system 00:03: >Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: >[dma 4]
pnp 00:04: >[io 0x0000-0x000f]
pnp 00:04: >[io 0x0081-0x0083]
pnp 00:04: >[io 0x0087]
pnp 00:04: >[io 0x0089-0x008b]
pnp 00:04: >[io 0x008f]
pnp 00:04: >[io 0x00c0-0x00df]
pnp 00:04: >Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:05: >[io 0x0070-0x0071]
pnp 00:05: >[irq 8]
pnp 00:05: >Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:06: >[io 0x0061]
pnp 00:06: >Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:07: >[io 0x0010-0x001f]
pnp 00:07: >[io 0x0022-0x003f]
pnp 00:07: >[io 0x0044-0x005f]
pnp 00:07: >[io 0x0062-0x0063]
pnp 00:07: >[io 0x0065-0x006f]
pnp 00:07: >[io 0x0072-0x007f]
pnp 00:07: >[io 0x0080]
pnp 00:07: >[io 0x0084-0x0086]
pnp 00:07: >[io 0x0088]
pnp 00:07: >[io 0x008c-0x008e]
pnp 00:07: >[io 0x0090-0x009f]
pnp 00:07: >[io 0x00a2-0x00bf]
pnp 00:07: >[io 0x00e0-0x00ef]
pnp 00:07: >[io 0x04d0-0x04d1]
system 00:07: >[io 0x04d0-0x04d1] has been reserved
system 00:07: >Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: >[io 0x00f0-0x00ff]
pnp 00:08: >[irq 13]
pnp 00:08: >Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:09: >Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: >[mem 0x00000000-0xffffffffffffffff disabled]
system 00:0a: >Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0b: >[mem 0x00000000-0xffffffffffffffff disabled]
pnp 00:0b: >[mem 0xfec20000-0xfec200ff]
system 00:0b: >[mem 0xfec20000-0xfec200ff] could not be reserved
system 00:0b: >Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0c: >[mem 0xfed00000-0xfed003ff]
pnp 00:0c: >Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:02.0: >PCI bridge to [bus 01-01]
pci 0000:00:02.0: > bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: > bridge window [mem 0xfd000000-0xfe0fffff]
pci 0000:00:02.0: > bridge window [mem 0xf0000000-0xf9ffffff 64bit pref]
pci 0000:00:04.0: >PCI bridge to [bus 02-02]
pci 0000:00:04.0: > bridge window [io 0xd000-0xdfff]
pci 0000:00:04.0: > bridge window [mem 0xfe500000-0xfe5fffff]
pci 0000:00:05.0: >PCI bridge to [bus 03-03]
pci 0000:00:05.0: > bridge window [io 0xc000-0xcfff]
pci 0000:00:05.0: > bridge window [mem 0xfe400000-0xfe4fffff]
pci 0000:00:06.0: >PCI bridge to [bus 04-04]
pci 0000:00:06.0: > bridge window [mem 0xfe300000-0xfe3fffff]
pci 0000:00:07.0: >PCI bridge to [bus 05-05]
pci 0000:00:07.0: > bridge window [mem 0xfe200000-0xfe2fffff]
pci 0000:00:09.0: >PCI bridge to [bus 06-06]
pci 0000:00:09.0: > bridge window [mem 0xfe100000-0xfe1fffff]
pci 0000:00:14.4: >PCI bridge to [bus 07-07]
pci_bus 0000:00: >resource 4 [io 0x0000-0x03af]
pci_bus 0000:00: >resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:00: >resource 6 [io 0x03b0-0x03df]
pci_bus 0000:00: >resource 7 [io 0x0d00-0xffff]
pci_bus 0000:00: >resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: >resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: >resource 10 [mem 0xe0000000-0xffffffff]
pci_bus 0000:01: >resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: >resource 1 [mem 0xfd000000-0xfe0fffff]
pci_bus 0000:01: >resource 2 [mem 0xf0000000-0xf9ffffff 64bit pref]
pci_bus 0000:02: >resource 0 [io 0xd000-0xdfff]
pci_bus 0000:02: >resource 1 [mem 0xfe500000-0xfe5fffff]
pci_bus 0000:03: >resource 0 [io 0xc000-0xcfff]
pci_bus 0000:03: >resource 1 [mem 0xfe400000-0xfe4fffff]
pci_bus 0000:04: >resource 1 [mem 0xfe300000-0xfe3fffff]
pci_bus 0000:05: >resource 1 [mem 0xfe200000-0xfe2fffff]
pci_bus 0000:06: >resource 1 [mem 0xfe100000-0xfe1fffff]
pci_bus 0000:07: >resource 4 [io 0x0000-0x03af]
pci_bus 0000:07: >resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:07: >resource 6 [io 0x03b0-0x03df]
pci_bus 0000:07: >resource 7 [io 0x0d00-0xffff]
pci_bus 0000:07: >resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:07: >resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:07: >resource 10 [mem 0xe0000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
Freeing initrd memory: 14864k freed
pci 0000:01:00.0: >Boot video device
PCI: CLS 64 bytes, default 64
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ d4000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000000ff)
audit: initializing netlink socket (disabled)
type=2000 audit(1350325146.388:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.19)
msgmni has been set to 15855
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0xf9000000, mapped to 0xffffc90012980000, using 1920k, total 1920k
efifb: mode is 800x600x32, linelength=3200, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 100x37
fb0: EFI VGA frame buffer device
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ahci 0000:00:11.0: >version 3.0
ahci 0000:00:11.0: >AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:11.0: >flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m1024@0xfe60b000 port 0xfe60b100 irq 19
ata2: SATA max UDMA/133 abar m1024@0xfe60b000 port 0xfe60b180 irq 19
ata3: SATA max UDMA/133 abar m1024@0xfe60b000 port 0xfe60b200 irq 19
ata4: SATA max UDMA/133 abar m1024@0xfe60b000 port 0xfe60b280 irq 19
ata5: SATA max UDMA/133 abar m1024@0xfe60b000 port 0xfe60b300 irq 19
ata6: SATA max UDMA/133 abar m1024@0xfe60b000 port 0xfe60b380 irq 19
ahci 0000:02:00.0: >irq 72 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:02:00.0: >AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:02:00.0: >flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
scsi6 : ahci
scsi7 : ahci
ata7: SATA max UDMA/133 abar m512@0xfe500000 port 0xfe500100 irq 72
ata8: SATA max UDMA/133 abar m512@0xfe500000 port 0xfe500180 irq 72
Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:12.2: >EHCI Host Controller
ehci_hcd 0000:00:12.2: >new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:12.2: >applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
QUIRK: Enable AMD PLL fix
ehci_hcd 0000:00:12.2: >debug port 1
ehci_hcd 0000:00:12.2: >irq 17, io mem 0xfe609000
ehci_hcd 0000:00:12.2: >USB 2.0 started, EHCI 1.00
usb usb1: >New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: >Product: EHCI Host Controller
usb usb1: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
usb usb1: >SerialNumber: 0000:00:12.2
hub 1-0:1.0: >USB hub found
hub 1-0:1.0: >5 ports detected
ehci_hcd 0000:00:13.2: >EHCI Host Controller
ehci_hcd 0000:00:13.2: >new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:13.2: >applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:13.2: >debug port 1
ehci_hcd 0000:00:13.2: >irq 21, io mem 0xfe607000
ehci_hcd 0000:00:13.2: >USB 2.0 started, EHCI 1.00
usb usb2: >New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: >Product: EHCI Host Controller
usb usb2: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
usb usb2: >SerialNumber: 0000:00:13.2
hub 2-0:1.0: >USB hub found
hub 2-0:1.0: >5 ports detected
ehci_hcd 0000:00:16.2: >EHCI Host Controller
ehci_hcd 0000:00:16.2: >new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:16.2: >applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:16.2: >debug port 1
ehci_hcd 0000:00:16.2: >irq 23, io mem 0xfe604000
ehci_hcd 0000:00:16.2: >USB 2.0 started, EHCI 1.00
usb usb3: >New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: >Product: EHCI Host Controller
usb usb3: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
usb usb3: >SerialNumber: 0000:00:16.2
hub 3-0:1.0: >USB hub found
hub 3-0:1.0: >4 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:12.0: >OHCI Host Controller
ohci_hcd 0000:00:12.0: >new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:12.0: >irq 18, io mem 0xfe60a000
usb usb4: >New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: >Product: OHCI Host Controller
usb usb4: >Manufacturer: Linux 3.5.0-17-generic ohci_hcd
usb usb4: >SerialNumber: 0000:00:12.0
hub 4-0:1.0: >USB hub found
hub 4-0:1.0: >5 ports detected
ohci_hcd 0000:00:13.0: >OHCI Host Controller
ohci_hcd 0000:00:13.0: >new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:13.0: >irq 20, io mem 0xfe608000
usb usb5: >New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: >Product: OHCI Host Controller
usb usb5: >Manufacturer: Linux 3.5.0-17-generic ohci_hcd
usb usb5: >SerialNumber: 0000:00:13.0
hub 5-0:1.0: >USB hub found
hub 5-0:1.0: >5 ports detected
ohci_hcd 0000:00:14.5: >OHCI Host Controller
ohci_hcd 0000:00:14.5: >new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:14.5: >irq 18, io mem 0xfe606000
usb usb6: >New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: >Product: OHCI Host Controller
usb usb6: >Manufacturer: Linux 3.5.0-17-generic ohci_hcd
usb usb6: >SerialNumber: 0000:00:14.5
hub 6-0:1.0: >USB hub found
hub 6-0:1.0: >2 ports detected
ohci_hcd 0000:00:16.0: >OHCI Host Controller
ohci_hcd 0000:00:16.0: >new USB bus registered, assigned bus number 7
ohci_hcd 0000:00:16.0: >irq 22, io mem 0xfe605000
usb usb7: >New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: >Product: OHCI Host Controller
usb usb7: >Manufacturer: Linux 3.5.0-17-generic ohci_hcd
usb usb7: >SerialNumber: 0000:00:16.0
hub 7-0:1.0: >USB hub found
hub 7-0:1.0: >4 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:04:00.0: >xHCI Host Controller
xhci_hcd 0000:04:00.0: >new USB bus registered, assigned bus number 8
xhci_hcd 0000:04:00.0: >irq 51, io mem 0xfe300000
xhci_hcd 0000:04:00.0: >irq 73 for MSI/MSI-X
xhci_hcd 0000:04:00.0: >irq 74 for MSI/MSI-X
xhci_hcd 0000:04:00.0: >irq 75 for MSI/MSI-X
xhci_hcd 0000:04:00.0: >irq 76 for MSI/MSI-X
xhci_hcd 0000:04:00.0: >irq 77 for MSI/MSI-X
xhci_hcd 0000:04:00.0: >irq 78 for MSI/MSI-X
xhci_hcd 0000:04:00.0: >irq 79 for MSI/MSI-X
xhci_hcd 0000:04:00.0: >irq 80 for MSI/MSI-X
usb usb8: >New USB device found, idVendor=1d6b, idProduct=0002
usb usb8: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: >Product: xHCI Host Controller
usb usb8: >Manufacturer: Linux 3.5.0-17-generic xhci_hcd
usb usb8: >SerialNumber: 0000:04:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 8-0:1.0: >USB hub found
hub 8-0:1.0: >2 ports detected
xhci_hcd 0000:04:00.0: >xHCI Host Controller
xhci_hcd 0000:04:00.0: >new USB bus registered, assigned bus number 9
usb usb9: >New USB device found, idVendor=1d6b, idProduct=0003
usb usb9: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: >Product: xHCI Host Controller
usb usb9: >Manufacturer: Linux 3.5.0-17-generic xhci_hcd
usb usb9: >SerialNumber: 0000:04:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 9-0:1.0: >USB hub found
hub 9-0:1.0: >2 ports detected
xhci_hcd 0000:05:00.0: >xHCI Host Controller
xhci_hcd 0000:05:00.0: >new USB bus registered, assigned bus number 10
xhci_hcd 0000:05:00.0: >irq 50, io mem 0xfe200000
xhci_hcd 0000:05:00.0: >irq 81 for MSI/MSI-X
xhci_hcd 0000:05:00.0: >irq 82 for MSI/MSI-X
xhci_hcd 0000:05:00.0: >irq 83 for MSI/MSI-X
xhci_hcd 0000:05:00.0: >irq 84 for MSI/MSI-X
xhci_hcd 0000:05:00.0: >irq 85 for MSI/MSI-X
xhci_hcd 0000:05:00.0: >irq 86 for MSI/MSI-X
xhci_hcd 0000:05:00.0: >irq 87 for MSI/MSI-X
xhci_hcd 0000:05:00.0: >irq 88 for MSI/MSI-X
usb usb10: >New USB device found, idVendor=1d6b, idProduct=0002
usb usb10: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb10: >Product: xHCI Host Controller
usb usb10: >Manufacturer: Linux 3.5.0-17-generic xhci_hcd
usb usb10: >SerialNumber: 0000:05:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 10-0:1.0: >USB hub found
hub 10-0:1.0: >2 ports detected
xhci_hcd 0000:05:00.0: >xHCI Host Controller
xhci_hcd 0000:05:00.0: >new USB bus registered, assigned bus number 11
usb usb11: >New USB device found, idVendor=1d6b, idProduct=0003
usb usb11: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb11: >Product: xHCI Host Controller
usb usb11: >Manufacturer: Linux 3.5.0-17-generic xhci_hcd
usb usb11: >SerialNumber: 0000:05:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 11-0:1.0: >USB hub found
hub 11-0:1.0: >2 ports detected
xhci_hcd 0000:06:00.0: >xHCI Host Controller
xhci_hcd 0000:06:00.0: >new USB bus registered, assigned bus number 12
xhci_hcd 0000:06:00.0: >irq 48, io mem 0xfe100000
xhci_hcd 0000:06:00.0: >irq 89 for MSI/MSI-X
xhci_hcd 0000:06:00.0: >irq 90 for MSI/MSI-X
xhci_hcd 0000:06:00.0: >irq 91 for MSI/MSI-X
xhci_hcd 0000:06:00.0: >irq 92 for MSI/MSI-X
xhci_hcd 0000:06:00.0: >irq 93 for MSI/MSI-X
xhci_hcd 0000:06:00.0: >irq 94 for MSI/MSI-X
xhci_hcd 0000:06:00.0: >irq 95 for MSI/MSI-X
xhci_hcd 0000:06:00.0: >irq 96 for MSI/MSI-X
usb usb12: >New USB device found, idVendor=1d6b, idProduct=0002
usb usb12: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb12: >Product: xHCI Host Controller
usb usb12: >Manufacturer: Linux 3.5.0-17-generic xhci_hcd
usb usb12: >SerialNumber: 0000:06:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 12-0:1.0: >USB hub found
hub 12-0:1.0: >2 ports detected
xhci_hcd 0000:06:00.0: >xHCI Host Controller
xhci_hcd 0000:06:00.0: >new USB bus registered, assigned bus number 13
usb usb13: >New USB device found, idVendor=1d6b, idProduct=0003
usb usb13: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb13: >Product: xHCI Host Controller
usb usb13: >Manufacturer: Linux 3.5.0-17-generic xhci_hcd
usb usb13: >SerialNumber: 0000:06:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 13-0:1.0: >USB hub found
hub 13-0:1.0: >2 ports detected
usbcore: registered new interface driver libusual
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: >RTC can wake from S4
rtc_cmos 00:05: >rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
hub 2-0:1.0: >unable to enumerate USB device on port 3
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
Magic number: 0:333:342
rtc_cmos 00:05: >setting system clock to 2012-10-15 18:19:07 UTC (1350325147)
powernow-k8: Found 1 AMD FX(tm)-8150 Eight-Core Processor (8 cpu cores) (version 2.20.00)
powernow-k8: Core Performance Boosting: on.
powernow-k8: 0 : pstate 0 (3600 MHz)
powernow-k8: 1 : pstate 1 (3300 MHz)
powernow-k8: 2 : pstate 2 (2700 MHz)
powernow-k8: 3 : pstate 3 (2100 MHz)
powernow-k8: 4 : pstate 4 (1400 MHz)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: OCZ-VERTEX2, 1.10, max UDMA/133
ata1.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: >Direct-Access ATA OCZ-VERTEX2 1.10 PQ: 0 ANSI: 5
sd 0:0:0:0: >[sda] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)
sd 0:0:0:0: >Attached scsi generic sg0 type 0
sd 0:0:0:0: >[sda] Write Protect is off
sd 0:0:0:0: >[sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: >[sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: >[sda] Attached SCSI disk
ata8: SATA link down (SStatus 0 SControl 300)
Freeing unused kernel memory: 928k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1472k freed
Freeing unused kernel memory: 1124k freed
udevd[136]: starting version 175
usb 7-4: >new full-speed USB device number 2 using ohci_hcd
Refined TSC clocksource calibration: 3612.147 MHz.
Switching to clocksource tsc
e1000e: Intel(R) PRO/1000 Network Driver - 2.0.0-k
e1000e: Copyright(c) 1999 - 2012 Intel Corporation.
e1000e 0000:03:00.0: >Disabling ASPM L0s
e1000e 0000:03:00.0: >Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:03:00.0: >irq 97 for MSI/MSI-X
EXT4-fs (sda2): INFO: recovery required on readonly filesystem
EXT4-fs (sda2): write access will be enabled during recovery
e1000e 0000:03:00.0: >eth0: (PCI Express:2.5GT/s:Width x1) 14:da:e9:0e:7c:24
e1000e 0000:03:00.0: >eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:03:00.0: >eth0: MAC: 4, PHY: 8, PBA No: FFFFFF-0FF
EXT4-fs (sda2): recovery complete
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
usb 7-4: >New USB device found, idVendor=2433, idProduct=b111
usb 7-4: >New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 7-4: >Product: 690LC
usb 7-4: >Manufacturer: ASETEK
usb 7-4: >SerialNumber: CCV_1.0
Adding 8331260k swap on /dev/sda3. Priority:-1 extents:1 across:8331260k SS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
udevd[375]: starting version 175
lp: driver loaded but no devices found
wmi: Mapper loaded
ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SMRG 1 (20120320/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
sp5100_tco: SP5100 TCO WatchDog Timer Driver v0.01
sp5100_tco: mmio address 0xbafe00 already in use
MCE: In-kernel MCE decoding enabled.
EDAC MC: Ver: 2.1.0
AMD64 EDAC driver v3.4.0
microcode: CPU0: patch_level=0x06000626
usb 10-1: >new full-speed USB device number 2 using xhci_hcd
input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input2
input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input3
input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input4
input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
hda_intel: Disabling MSI
hda-intel: 0000:01:00.1: Handle VGA-switcheroo audio client
usb 10-1: >New USB device found, idVendor=0566, idProduct=3015
usb 10-1: >New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 10-1: >Product: USB KEYBOARD
usb 10-1: >Manufacturer: ELAN
usb 10-1: >ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
asus_wmi: ASUS WMI generic driver loaded
asus_wmi: Initialization: 0x0asus_wmi: BIOS WMI version: 0.9
asus_wmi: SFUN value: 0x0[ 3.089455] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input10
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: ELAN USB KEYBOARD as /devices/pci0000:00/0000:00:07.0/0000:05:00.0/usb10/10-1/10-1:1.0/input/input11
hid-generic 0003:0566:3015.0001: >input,hidraw0: USB HID v1.10 Keyboard [ELAN USB KEYBOARD] on usb-0000:05:00.0-1/input0
hid-generic 0003:0566:3015.0002: >usage index exceeded
hid-generic 0003:0566:3015.0002: >item 0 2 2 2 parsing failed
hid-generic: probe of 0003:0566:3015.0002 failed with error -22
microcode: failed to load file amd-ucode/microcode_amd_fam15h.bin
microcode: CPU1: patch_level=0x06000626
microcode: failed to load file amd-ucode/microcode_amd_fam15h.bin
microcode: CPU2: patch_level=0x06000626
microcode: failed to load file amd-ucode/microcode_amd_fam15h.bin
microcode: CPU3: patch_level=0x06000626
microcode: failed to load file amd-ucode/microcode_amd_fam15h.bin
microcode: CPU4: patch_level=0x06000626
microcode: failed to load file amd-ucode/microcode_amd_fam15h.bin
microcode: CPU5: patch_level=0x06000626
microcode: failed to load file amd-ucode/microcode_amd_fam15h.bin
microcode: CPU6: patch_level=0x06000626
microcode: failed to load file amd-ucode/microcode_amd_fam15h.bin
microcode: CPU7: patch_level=0x06000626
microcode: failed to load file amd-ucode/microcode_amd_fam15h.bin
microcode: Microcode Update Driver: v2.00 , Peter Oruba
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
usb 10-2: >new full-speed USB device number 3 using xhci_hcd
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
usb 10-2: >New USB device found, idVendor=0403, idProduct=6001
usb 10-2: >New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 10-2: >Product: FT232R USB UART
usb 10-2: >Manufacturer: FTDI
usb 10-2: >SerialNumber: A800fq8V
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
USB Serial support registered for generic
usbcore: registered new interface driver ftdi_sio
USB Serial support registered for FTDI USB Serial Device
ftdi_sio 10-2:1.0: >FTDI USB Serial Device converter detected
usb 10-2: >Detected FT232RL
usb 10-2: >Number of endpoints 2
usb 10-2: >Endpoint 1 MaxPacketSize 64
usb 10-2: >Endpoint 2 MaxPacketSize 64
usb 10-2: >Setting MaxPacketSize 64
usb 10-2: >FTDI USB Serial Device converter now attached to ttyUSB0
ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input12
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input13
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input14
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input15
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 304.51 Tue Sep 18 17:16:56 PDT 2012
EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
init: failsafe main process (838) killed by TERM signal
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
ppdev: user-space parallel port driver
type=1400 audit(1350325149.308:2): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=983 comm="apparmor_parser"
type=1400 audit(1350325149.308:3): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=959 comm="apparmor_parser"
type=1400 audit(1350325149.308:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=957 comm="apparmor_parser"
type=1400 audit(1350325149.308:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=956 comm="apparmor_parser"
type=1400 audit(1350325149.308:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper" pid=958 comm="apparmor_parser"
type=1400 audit(1350325149.308:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=959 comm="apparmor_parser"
type=1400 audit(1350325149.308:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper//chromium_browser" pid=957 comm="apparmor_parser"
type=1400 audit(1350325149.308:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=962 comm="apparmor_parser"
type=1400 audit(1350325149.308:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=956 comm="apparmor_parser"
e1000e 0000:03:00.0: >irq 97 for MSI/MSI-X
usb 5-3: >new full-speed USB device number 2 using ohci_hcd
e1000e 0000:03:00.0: >irq 97 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
usb 5-3: >New USB device found, idVendor=1532, idProduct=0101
usb 5-3: >New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-3: >Product: Razer Copperhead Laser Mouse
usb 5-3: >Manufacturer: Razer
input: Razer Razer Copperhead Laser Mouse as /devices/pci0000:00/0000:00:13.0/usb5/5-3/5-3:1.0/input/input16
hid-generic 0003:1532:0101.0003: >input,hidraw1: USB HID v1.00 Mouse [Razer Razer Copperhead Laser Mouse] on usb-0000:00:13.0-3/input0
input: Razer Razer Copperhead Laser Mouse as /devices/pci0000:00/0000:00:13.0/usb5/5-3/5-3:1.1/input/input17
hid-generic 0003:1532:0101.0004: >input,hidraw2: USB HID v0.01 Keyboard [Razer Razer Copperhead Laser Mouse] on usb-0000:00:13.0-3/input1
------------[ cut here ]------------
WARNING: at /build/buildd/linux-3.5.0/arch/x86/mm/ioremap.c:102 __ioremap_caller+0x335/0x380()
Hardware name: To be filled by O.E.M.
Pid: 1119, comm: Xorg Tainted: P O 3.5.0-17-generic #28-Ubuntu
Call Trace:
[] warn_slowpath_common+0x7f/0xc0
[] warn_slowpath_null+0x1a/0x20
[] __ioremap_caller+0x335/0x380
[] ? os_map_kernel_space+0x85/0xf0 [nvidia]
[] ioremap_cache+0x14/0x20
[] os_map_kernel_space+0x85/0xf0 [nvidia]
[] _nv014922rm+0x76/0x92 [nvidia]
[] ? _nv009711rm+0x89/0x142 [nvidia]
[] ? _nv014493rm+0xb8/0x102 [nvidia]
[] ? _nv014531rm+0x58/0x9e [nvidia]
[] ? _nv014503rm+0xbe/0x2f0 [nvidia]
[] ? _nv014536rm+0xab/0x174 [nvidia]
[] ? _nv014502rm+0x50/0x5d [nvidia]
[] ? _nv014477rm+0x82d/0x96b [nvidia]
[] ? _nv012700rm+0x174/0x573 [nvidia]
[] ? _nv012700rm+0xf2/0x573 [nvidia]
[] ? _nv004024rm+0x1bb/0x19e9 [nvidia]
[] ? _nv004049rm+0x8675/0xae60 [nvidia]
[] ? _nv004049rm+0x7037/0xae60 [nvidia]
[] ? _nv010018rm+0x25/0x40 [nvidia]
[] ? _nv014977rm+0x7c9/0x943 [nvidia]
[] ? _nv001097rm+0x42b/0x6cb [nvidia]
[] ? rm_init_adapter+0xac/0x146 [nvidia]
[] ? nv_kern_open+0x4b4/0x800 [nvidia]
[] ? chrdev_open+0xaf/0x1a0
[] ? __dentry_open+0x21f/0x330
[] ? cdev_put+0x30/0x30
[] ? vfs_open+0x3a/0x40
[] ? nameidata_to_filp+0x58/0xb0
[] ? do_last+0x49f/0xa10
[] ? apparmor_file_alloc_security+0x2c/0x60
[] ? path_openat+0xd9/0x430
[] ? do_filp_open+0x41/0xa0
[] ? alloc_fd+0xc6/0x110
[] ? do_sys_open+0xf5/0x230
[] ? mntput+0x24/0x40
[] ? sys_open+0x21/0x30
[] ? system_call_fastpath+0x16/0x1b
---[ end trace d9f3abc6f8a4a01d ]---
e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
e1000e 0000:03:00.0: >eth0: 10/100 speed: disabling TSO
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
NVRM: GPU at 0000:01:00: GPU-d4cbb77e-43de-69f0-f9dd-2941f9eebdce
NVRM: Your system is not currently configured to drive a VGA console
NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
NVRM: requires the use of a text-mode VGA console. Use of other console
NVRM: drivers including, but not limited to, vesafb, may result in
NVRM: corruption and stability problems, and is not supported.
usb 12-2: >new full-speed USB device number 2 using xhci_hcd
usb 12-2: >Device not responding to set address.
usb 12-2: >Device not responding to set address.
usb 12-2: >device not accepting address 2, error -71
hub 12-0:1.0: >unable to enumerate USB device on port 2
usb 12-2: >new high-speed USB device number 4 using xhci_hcd
usb 12-2: >New USB device found, idVendor=174c, idProduct=55aa
usb 12-2: >New USB device strings: Mfr=2, Product=3, SerialNumber=1
usb 12-2: >Product: RVS02 SuperSpeed
usb 12-2: >Manufacturer: SST
usb 12-2: >SerialNumber: 0000000000000001BA
usb 12-2: >ep 0x81 - rounding interval to 32768 microframes, ep desc says 0 microframes
usb 12-2: >ep 0x2 - rounding interval to 32768 microframes, ep desc says 0 microframes
Initializing USB Mass Storage driver...
scsi8 : usb-storage 12-2:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
scsi 8:0:0:0: >Direct-Access ASMT 2105 0 PQ: 0 ANSI: 5
sd 8:0:0:0: >Attached scsi generic sg1 type 0
sd 8:0:0:0: >[sdb] Attached SCSI removable disk
usb 12-2: >USB disconnect, device number 4
usb 1-2: >new high-speed USB device number 2 using ehci_hcd
usb 1-2: >New USB device found, idVendor=174c, idProduct=55aa
usb 1-2: >New USB device strings: Mfr=2, Product=3, SerialNumber=1
usb 1-2: >Product: RVS02 SuperSpeed
usb 1-2: >Manufacturer: SST
usb 1-2: >SerialNumber: 0000000000000001BA
scsi9 : usb-storage 1-2:1.0
scsi 9:0:0:0: >Direct-Access ASMT 2105 0 PQ: 0 ANSI: 5
sd 9:0:0:0: >Attached scsi generic sg1 type 0
sd 9:0:0:0: >[sdb] Attached SCSI removable disk
usb 1-2: >USB disconnect, device number 2